How to install aluminum LED light bar

With the popularity of LEDs, more and more users use aluminum LED light strips, so users are searching for "aluminum LED light strip installation method" on Baidu. Whether it is a personal or a large project, after purchasing aluminum LED light strips, How to install the problem and future maintenance, etc.! "Xin Qin Lighting" 10 years old aluminum LED light bar manufacturer, today teach you how to quickly and correctly install aluminum LED light bar. The best installation method of aluminum LED light bar mainly has the following five points!

First of all: the four-wire aluminum LED strip has four wires, three rows of lights (note that it is not four rows of lights~~), each row of 1 meter 24 lights, 24*3=72. Because the power of each lamp bead is 0.05W, the power of the 72 bead aluminum LED strip is: 72*0.05=3.6W.

Method 2: The width of the four-wire aluminum LED light bar is about 22mm, the thickness is about 8mm, and the weight is about 0.25kg/m (4 meters per kilogram)

Method 3: Each aluminum LED light bar must be equipped with a special plug (plug with a transformer); the transparent plastic cover must be removed when connecting, and the test light must be connected and then closed. It is impossible to directly connect with the cover, so it is easy to short-circuit!

Method 4: There is a "reaming cut" mark for every meter, which can only be cut when the mark is cut. Wrong cutting or cutting will result in a meter not bright! Some of them will be missed when marking the mark, it is best to look carefully before cutting The position under the sign can be cut according to the local area not connected to the center. You can tell if you look carefully.

Finally: when the aluminum LED light bar is installed, it is usually placed in the lamp trough and just straightened, or it can be fixed with a string or thin iron wire. If external or vertical installation is required, clips and tail plugs need to be purchased separately. The original clip is fully transparent, it is best to put waterproof glass glue on the tail plug and plug after installation, so that the waterproof function is better.